My Friends Cars

Hey, welcome to my BUDS site.
This was just opened up and I
will be adding pictures of all
my friends cars later on. Check
back to see some HOT cars!

Johns Car

A StrutBar and a GReddy kit?! But how? Nice looking aluminum heat shield too!

Nice shot of the engine bay.

John's Red GReddy Turbo Miata!

Nicely polished GReddy Turbo pipe!! Note the stock airbox used and placement of AirFlow Meter. This is done for the use of the StrutBar. (See my pics for actual stock GReddy placement of A/F Meter.)

A good shot of the nicely made 1/4 thick aluminum heat shield with backing plate.

Top view of Heat Shield and backing plate.

StrutBar clearance over the turbo. Looks like it just fits! Note mod made to A/F Meter.

A good view of how the A/F Meter is connected to the turbo. Powersteering prohibits the use of the filter cone included in the stock GReddy kit.

This is the 125psi $90 high pressure in-line fuel pump from AutoZone. Master# ee8305 Bosch # 0580-254-957.

Here is a good shot of the hood with aluminum flashing and 2200 degree insulation (under the aluminum.) This is great protection for the hood from all the heat made by the turbo. (Aluminum from Home Depot.)

Another view of heatshield and strut bar clearance.

Top view of box showing the back plate.

Another shot of the A/F Meter.

This is the 2200 degree insulation that sits between the hood and aluminum flashing.

BACK

	A StrutBar and a GReddy kit?! But how? Nice looking aluminum heat shield too!
	Nice shot of the engine bay.
	John's Red GReddy Turbo Miata!
	Nicely polished GReddy Turbo pipe!! Note the stock airbox used and placement of AirFlow Meter. This is done for the use of the StrutBar. (See my pics for actual stock GReddy placement of A/F Meter.)
	A good shot of the nicely made 1/4 thick aluminum heat shield with backing plate.
	Top view of Heat Shield and backing plate.
	StrutBar clearance over the turbo. Looks like it just fits! Note mod made to A/F Meter.
	A good view of how the A/F Meter is connected to the turbo. Powersteering prohibits the use of the filter cone included in the stock GReddy kit.
	This is the 125psi $90 high pressure in-line fuel pump from AutoZone. Master# ee8305 Bosch # 0580-254-957.
	Here is a good shot of the hood with aluminum flashing and 2200 degree insulation (under the aluminum.) This is great protection for the hood from all the heat made by the turbo. (Aluminum from Home Depot.)
	Another view of heatshield and strut bar clearance.
	Top view of box showing the back plate.
	Another shot of the A/F Meter.
	This is the 2200 degree insulation that sits between the hood and aluminum flashing.