For the first scan , I choose 172 dpi (dots-per-inch) ,this gives
me an image size of 1000x672 pixels, then I saved it to the JPG-format
with a compression rate of 25 %
( which is the most used ) The final file has a size of 87.624 Bytes
, which is still quite acceptable for sending over the net
If you view it full screen size, you are still able to zoom into
the image and have a quite good quality. For putting it on a website it
is a bit too large ( in real size ) so I tried the next scan with 110 dpi
Next step : Scanning with 72 dpi produces an image with 418x 281 pixels needing 23.392 Bytes
These images were all saved to JPG with a compression rate of 25 % ( which is standard) . If you have a greater compression rate , you file size gets even smaller , but the image quality gets worse . here some examples :
If you want to integrate you images in a text page, you may want to have even smaller image sizes ( perhaps 200 or 150 bits large).
If you use Paintshop Pro , try Image/Resample and adjust the size
of your picture to the size you need ( sometimes you will need afterwards
to use Image/Normal Filters/Sharpen if the resulting image is a bit unsharp)
One last word : The JPG-Standard is best with images having many different colors , like color pictures , if you need buttons or banners with few colors, the GIF -Standard gives you very small files ( eventually you will need to reduce the number of colors)